「硬質快速門」快速門電機設備要害



"Hard Fast Gate" Fast Gate Motor Equipment Key Points

 

快速門是現在許多大型企業的常用門和一些特別職業的專用門。



Fast Gate is a common door in many large enterprises and a special specialty for some special professions.

而快速卷簾門能夠快速的運轉都離不開電機的驅動效果，而電機運用壽數的長短除了和日常保養有關外與其設備也有直接的聯絡，若是快速卷簾門的電機設備不妥，整個快速卷簾門的運轉也將受到很大的影響。



The fast rolling shutter can run fast without the driving effect of the motor. Besides the daily maintenance, the service life of the motor has direct contact with its equipment. If the motor equipment of the fast rolling shutter is not appropriate, the operation of the whole fast rolling shutter will be greatly affected.



下面我們就來簡略談?wù)効焖倬砗熼T電機的設備留意要害，希望對我們有所協助。



Next, we will briefly talk about the key points of the equipment of the fast rolling shutter motor, hoping to help us.



設備過快速卷簾門的人都知道，快速門電機以及減速電機只能以規定的設備辦法設備，并要按照說明要求將電機裝配在平整、無振動、耐扭曲變形的底座上，哪還有哪些要害可留意的呢?



Everyone knows that fast shutter motors and deceleration motors can only be equipped according to the prescribed equipment methods, and the motors should be assembled on a flat, non-vibration, distortion-resistant base according to the instructions. What are the key points to pay attention to?



「硬質快速門」快速門電機設備要害



"Hard Fast Gate" Fast Gate Motor Equipment Key Points



在設備快速卷簾門的電機時，先將快速門電機和從動設備對中，避免輸出軸負荷超出容許范圍，在此過程中要留意容許的徑向力和軸向力，千萬不要敲擊和碰擊軸端。然后，運用電機軸動平衡帶有半鍵來平衡套裝在軸上的零件。



When the motor of the fast rolling shutter door is equipped, align the motor of the fast shutter and the driven equipment first, so as to avoid the output shaft load exceeding the allowable range. In this process, we should pay attention to the allowable radial and axial forces, and never hit or hit the shaft end. Then, the dynamic balance of the motor shaft with half key is used to balance the parts mounted on the shaft.



當快速卷簾門電機是以筆直的辦法來設備時，電機的上方要設有遮蓋防雨罩來避免有液體或是異物侵略到快速門電機的內部。



When the fast shutter door motor is equipped in a straight way, it should be covered with a rain shield above the motor to prevent liquid or foreign matter from invading the inside of the fast door motor.



一般來說，冷凝水排放孔大多會用塑料塞來密封，只要在需求的情況下才能夠翻開。



Generally speaking, condensate discharge holes are mostly sealed with plastic plugs, which can be opened only when required.



快速卷簾門的設備人員留意提示運用人員，制止將冷凝水排放孔打開，這會使具有較高防護等級的外殼防護無效。



The equipment personnel of the fast rolling shutter door should warn the operators to stop opening the condensate drainage hole, which will make the shell protection with higher protection level ineffective.

此外，假設快速門電機是帶有手動設備的制動電機，設備這類電機時，一定要擰上手動開釋桿(回彈式手動開釋設備)或許擰螺栓(固定手動開釋設備)，確保快速門電機的運用安全，避免意外安全事故的發作。



In addition, assuming that the fast door motor is a brake motor with manual equipment, when equipped with such motors, it is necessary to screw on the manual release rod (rebound manual release device) or bolt (fixed manual release device) to ensure the safe operation of the fast door motor and avoid accidents.